Product Categories
Contact Us
Attn:Mr.liu:(+86)13646178217
Mr.peng:(+86)15251501754
TEL: +86-510-88731537
Fax: +86-510-88340005
E-mail: wxzd@wxzd.com
Address: Yangjian Town, Xishan District, Wuxi City, Jiangsu, China
Home > Product > spouting

spouting

  • Powder Coated Carbon Steel Bend with Three Angles

    Powder Coated Carbon Steel Bend with Three AnglesMade of Steel, Stainless steel. The stainless steel elbow fitting in the pipeline system is the to pipe fitting to change the direction of the pipeline. According to the angle, there are three most commonly used, including 45°, 90° and 180 °. And according to the project needs, it also includes other abnormal angle elbow fitting such as 60°. The stainless steel elbow is different from the carbon steel elbow mainly in the material. Its chemical composition will keep the elbow fitting surface will not rust and be corroded for long time.Read More

  • Stainless Steel Manual Two Way Valve Diverter Flour Mill Optional Chain

    Stainless Steel Manual Two Way Valve Diverter Flour Mill Optional ChainThe two way valve uses the high - quality steel, so the product is more durable and the appearance is bright and glossy. The service life is extended. The two way valve has strict technology, manufacturing products according to the national regulation are strictly controlled, so that security is more secure. The skilled craft, strict production process and advanced production workshop and equipment of the two way valve make the high quality products.Read More

  • Stainless Steel Spout Flange Connecting Straight Pipe or Bend in Pneumatic Conveying System

    Stainless Steel Spout Flange Connecting Straight Pipe or Bend in Pneumatic Conveying SystemAttached to conveyor covers, above roller bins or to tank covers, to connect the duct path to a terminal Materials available: cold steel, stainless steel .The flange is also call the spout flange. The flange is the connection part between the shafts, which is used for the connection of the pipe end. There is the flange using on the outlet and inlet of the equipment, which is used for the connection of the equipment, such as the reducer flange. The flange connection or the flanged joint refers to the releasable connection of the flange, filler piece and bolt as a set of combined sealing structure.Read More

  • Stainless Steel Bend with Three Angles

    Stainless Steel Bend with Three AnglesMade of Steel, Stainless steel. The stainless steel elbow fitting is the most used pipe fittings in the pipeline. It occupies a large proportion of all pipe fittings, so its importance of the pipeline can be seen. The main function of the elbow fitting is to change the direction of the pipeline. All the pipes can not always be straight, so the elbow fitting needs to turn. The most commonly used is 90 ° elbow fittings, 45 ° elbow fittings, and 180 ° elbow fittings.Three different angles (10o,15o,and 20o) can be combines freely to create bends of any size Materials available: cold steel, stainless steel FAQ 1.Why choose us We are experts in pneumatic conveying industry over 20 years. We have provided products and services to...Read More

  • Stainless Steel Straight Pipe Cut to Any Length with Any Diameters

    Stainless Steel Straight Pipe Cut to Any Length with Any Diametersmade of steel (SPC, outer surfaces finished with static dust plating, and inside with 214 innocuity wearable dope) stainless steel (SUS304) used for the straight portions of a duct path -Used for the straight portions of a duct path -Materials available: cold steel, stainless steel -Diameter...Read More

  • Rubber Cap for Stainless Steel Pipes or Spout

    Rubber Cap for Stainless Steel Pipes or SpoutThe rubber cap uses high quality materials. It is well-chosen, normal and can stand wear and tear. Its thickening material is safe and stable. It has great workmanship, so it is thicker and durable. It has been through the high strength test and is stable and reliable. The rubber cap is easy to install and is suitable for various products.Read More

  • Stainless Twin Miter Bend Adjusted to Any Angles

    Stainless Twin Miter Bend Adjusted to Any AnglesCan be adjusted freely to any angle from 0o to 45o Materials available: cold steel, stainless steel. The twin miter bend can adjust and change the direction within a wider angle range. The pipe elbow is composed of two parts intersecting at one plane. This plane and the imaginary line that assumes that the pipeline is extending in a straight line to determine the flow direction. The above two parts can rotate relative to the plane, thereby forming the required elbow pipe joint.Read More

  • Zinc Plated or Stainless Steel Pipe Clamp with Chrome Screw

    Zinc Plated or Stainless Steel Pipe Clamp with Chrome ScrewThe pipe strap is also called the clamp. The clamp connection is a new kind connection method of the steel pipe, which is also called the groove connection. It has many advantages. It is used to connect the weight of the pump line pipe strap. If the weight is large, the pressure is greater, so generally the pump line pipe strap matches with the rubber ring. The rubber ring plays a sealing role, which is also an important accessory. It is cheap, but the role is greater.Read More

  • Stainless Steel Manual Two Way Valve Diverter

    Stainless Steel Manual Two Way Valve DiverterThe two way valve is the two ports of the valve, which can be used as the inlet or outlet. When installing the pipeline, without attention to flow direction, according to the operating conditions select the installation direction. The manually-operated valve includes butterfly valves, ball valves, sluice valves, and the focus is on manual switches.Read More

  • Stainless Steel Y Shape fork Pipe Tee to Join Two Duct Path to Signle Path in a Flour Mill Pneumatic Conveying System

    Stainless Steel Y Shape fork Pipe Tee to Join Two Duct Path to Signle Path in a Flour Mill Pneumatic Conveying SystemThe pipe tee is a pipe fitting used in the branch of the pipeline. For the use of seamless pipe production of the tee, the process usually used is hydro-forming and hot forming. 1.Butt welding tee pipe: The tee pipe fitting which is welded after docking with the connection pipe fitting. 2. Adapting form y pipe fitting: The tee pipe fitting which is welded or spliced after inserting the connection pipe fitting into the each end of the tee. 3. Bite plumbing tee: The tee pipe fitting whose each end is the bite type joint, and is fastened after inserting the pipe fitting. 4.Threaded type tee: The tee pipe fitting which is connected with the pipe by a threaded method.We have provided products and services to major flour and grain mill in China for last 20 years and still...Read More