Product Categories
Contact Us
Attn:Mr.liu:(+86)13646178217
Mr.peng:(+86)15251501754
TEL: +86-510-88731537
Fax: +86-510-88340005
E-mail: wxzd@wxzd.com
Address: Yangjian Town, Xishan District, Wuxi City, Jiangsu, China
Home > Knowledge > Content
Stainless steel pipe clamp installation procedure
Aug 17, 2018

The stainless steel pipe clamp is mainly installed on the ground rail. The guide rail can be welded on the foundation or fixed by screws. After the operation, the guide nut is pushed into the rail and rotated 90 degrees to embed the lower half of the pipe body. Put the nut on the tube to be fixed, then put the upper half of the tube body and cover plate and fix it with screws.

Material properties of stainless steel pipe clamps

Density, flexural strength, impact toughness, compressive strength, modulus of elasticity, tensile strength, temperature resistance, color.

Stainless steel pipe clamp installation procedure

The stainless steel pipe clamp is assembled on the welding plate. Before assembly, in order to better determine the direction of the clamp, it is recommended to mark the fixed position first, then weld it, and insert the lower half of the pipe clamp. A pipe that needs to be fixed. Then put the other half of the tube body and cover and tighten with screws. Do not directly solder the bottom plate of the pipe clamp.

On the grounding rail, the rail can be welded to the foundation or fixed with screws. Then push the rail nut into the rail and turn it 90 degrees. Insert the lower half of the tube into the nut, put the tube to be fixed, and then put it. The upper half of the tube body and cover are fixed with screws.

http://www.zdsheetmetalfab.com/


Previous: Application range of Zinc plated pipe clamp with chrome screw

Next: Flour mill vibro discharger operation requirements