Product Categories
Contact Us
TEL: +86-510-88731537
Fax: +86-510-88340005
Address: Yangjian Town, Xishan District, Wuxi City, Jiangsu, China
Home > Knowledge > Content
Plastic elbow fitting temperature control and process improvement
Apr 11, 2018

Nowadays, in the constant development of its industrial technology, its technology is constantly improving. Many of its industries are constantly making progress. The development of its technology facilitates people's lifestyles. The technical parameters of plastic elbows It needs to be used according to certain methods and methods to ensure that the plastic elbows produced and processed have good characteristics and advantages of use.

The plastic elbow fitting must also be controlled at the temperature. Different factors have different effects on the stamping elbow. It must be used in accordance with the corresponding methods and methods to ensure the specific use value of the stamped elbow in use. effect.

The manufacturing process of the plastic elbow thick-walled elbow is followed by the addition of the bend-diameter ratio of the elbow, so that the profit of the elbow product is severely kneaded and tortuously formed: There are three methods that are more commonly used, and the thick-walled elbow pipe making process is one method. Called expansion method, another method is called stamping method.

There are many factors that affect springback, but after the machine tool is adjusted, the bending process parameters (bending radius, bending speed, clamping force, etc.) have been determined, and the bend angle is determined when bending a certain batch of material pipes. The relationship with springback simplifies some of the factors that affect springback, so that the angle of the bend of the elbow of the bender and the bending angle of the pipe can be seen as a linear relationship, which is a simple and practical way of determining the rebound.

Previous: Basic principles and technical requirements of Prefabricated spoutings processing

Next: Elbow weld fitting use requirements and process classification