Product Categories
Contact Us
Attn:Mr.liu:(+86)13646178217
Mr.peng:(+86)15251501754
TEL: +86-510-88731537
Fax: +86-510-88340005
E-mail: wxzd@wxzd.com
Address: Yangjian Town, Xishan District, Wuxi City, Jiangsu, China
Home > Knowledge > Content
Wall mount pipe clamp series and installation method
Mar 31, 2018

The difference between the wall mount pipe clamp and the ordinary pipe clamp is that it can be mounted on the wall. In order to ensure the stability of the product, the material it chooses is also required. It should meet the requirements of density, bending strength, impact toughness, compression strength, modulus of elasticity, tensile strength, temperature resistance, color and so on.

 

According to the type of the corresponding pipe, the wall mount pipe clamp can be divided into different series of products. One is a light series pipe clamp, which is applied to the ordinary mechanical pressure pipe of 6 sizes series, and the outer diameter of the pipe is 6-57mm. The other is a duplex series pipe clamp, which is applied to 5 sizes of mechanical pressure pipes, and the outer diameter of pipes is 6-42mm. Another is a heavy series pipe clamp for 8 dimensions series of high mechanical pressure pipes, and the outer diameter of pipes is 8-273mm.

 

Usually, the wall mount pipe clamp is installed on the welding plate. Before assembly, it is better to determine the direction of the clamp. It is suggested to mark first at the fixed place, then weld the weld, insert the lower part of the pipe clamp, and put on the fixed pipe. Then put the other half of the pipe body and cover plate, screw it up, but be careful not to directly weld the bottom plate that has been installed.

 

If it is to be mounted on the ground rail, the guide rail can be welded on the base or fixed with a screw, then the guide nut is pushed into the rail, and then 90 degrees, the next half wall hanger jacket is embedded in the nut, the fixed pipe is placed, the upper half pipe clamp body and the cover plate are put on the top, and the screw is fixed with the screw.

 

The wall mount pipe clamp can also be assembled, the guide rail can be welded on the base, or the screw is fixed with the screw. First, the lower half pipe clamp is installed, the fixed pipe is placed on the upper half pipe clamp, and the screw is fixed with the screw to prevent it from turning. Then install second pipe clamps, the same way as above.

 

http://www.zdsheetmetalfab.com/


Previous: Variety of fast tube clamp and its manufacturing process

Next: Stainless steel pipe clamp features and uses to distinguish