Product Categories
Contact Us
TEL: +86-510-88731537
Fax: +86-510-88340005
Address: Yangjian Town, Xishan District, Wuxi City, Jiangsu, China
Home > Knowledge > Content
stainless steel screw conveyors instructions for use
Mar 03, 2018

Stainless steel screw conveyors enable a uniform and continuous supply of different types of dry powdery material,such as coal, cement, grain, sand and so on. Usually stainless steel screw feeder use cycloid reducer, and install VF converter, the device can adjust the speed in a wide range, and have a stable and reliable operation.

In addition, stainless steel screw feeder offer long service life under normal operating conditions,and they have low operating noise, compact size and small volume. Users can adjust the material flow according to the actual needs to meet different production process requirements.

About stainless steel screw feeder instructions for use:

When installing the stainless steel screw feeder, pay attention to control vertical and horizontal error of the machine casing and both ends of the rack within the allowable range. The base should be firmly secured after the cabinet properly installed, and then people should tighten the anchor screws.

When installing in the field, the gasket should be used between the inlet and outlet flanges of Stainless steel screw conveyors without any gap. After installationit should also be carefully examined whether there is sufficient lubricant at every oil storage.

Under normal circumstances, Stainless steel screw conveyors should maintain a steady state during operation, and the bearing box should not leak oil, the bearing temperature should not exceed 20 . Equipment should be maintained during the operation of uniform feeding to avoid the accumulation to delivery materials and overload to drive. Materials to be transported may not be mixed with hard, large pieces of material, to avoid spiral stuck causing damage to the body.

In Stainless steel screw conveyors should be maintained at no load condition, stop feeding before stopping, waiting for the delivery of materials within the case before they stop working. During the operation of stainless steel screw feeder people should pay attention to observe its operational status, ensure that the transmission works well, and often add lubricants.



Previous: the characteristics and main components of flour mill vibro dischargers

Next: Y tee pipe fitting hydraulic bulging and shape requirements