Product Categories
Contact Us
Attn:Mr.liu:(+86)13646178217
Mr.peng:(+86)15251501754
TEL: +86-510-88731537
Fax: +86-510-88340005
E-mail: wxzd@wxzd.com
Address: Yangjian Town, Xishan District, Wuxi City, Jiangsu, China
Home > Knowledge > Content
Stainless steel elbow production materials and installation process
Feb 03, 2018

Stainless steel elbow in use when different from the carbon steel elbow is the main material is different from the chemical composition contained in the use of its elbow will keep the surface for a long time will not rust and corrosion, stainless steel elbow In the piping system, the elbow is the key to change the direction of the pipeline. According to the angle, the elbow can be divided into three kinds of most commonly used 45 ° and 90 ° 180 °, and 60 ° Other non-normal angle elbow.

Stainless steel elbow in the production process of its materials are made of alloy steel, calcined cast iron, cast iron, carbon steel, non-ferrous metals and plastics, etc., in the use and the way the pipe has a direct welding (the most common way) Flange Connection, hot melt connection, fused connection, screw connection and socket connection.

Stainless steel elbow in accordance with its production process can be effectively divided into welded elbows, stamping elbows, hot elbows, pushing elbows, casting elbows, forging elbows, clip elbows and so on. Other names: 90 ° elbow, right-angle bend, love and bend, such as white steel elbow.

Stainless steel elbow in the installation process, the stainless steel elbow can be connected directly to the pipeline installed in the use of its position in accordance with the use of its installation, under normal circumstances, can be used in the installation Any position in the pipeline, but the need to seal, to prevent the emergence of leakage phenomenon, affecting the normal operation of the pipeline.

Stainless steel elbow ball valve, globe valve, gate valve use, only for full open or fully closed, do not agree to do to adjust the flow with, so as not to seal. Long-term storage of stainless steel elbow, should be checked on schedule, often exposed to the processing surface should be kept clean, remove dirt, neatly stored indoors in a dry place, non-stacked or open storage. Always keep the stainless steel elbows dry and ventilated, the holder clean and tidy, in accordance with the exact method of storage.

http://www.zdsheetmetalfab.com/

Previous: Stainless Steel Straight Exhaust Pipe end shape and production methods

Next: The stainless steel pipe clamp has good hygienic performance and low pressure loss.