Product Categories
Contact Us
Attn:Mr.liu:(+86)13646178217
Mr.peng:(+86)15251501754
TEL: +86-510-88731537
Fax: +86-510-88340005
E-mail: wxzd@wxzd.com
Address: Yangjian Town, Xishan District, Wuxi City, Jiangsu, China
Home > Knowledge > Content
Motor vibration source of Bottom vibrating discharger
Aug 08, 2018

In the process of operation, the bottom vibrating discharger is very suitable for the bottom discharge of flour, feed, chemical, medicine and other powdery materials similar to flour. It uses vibration motor as the source to drive the high frequency vibration of the discharge hopper. The central part of the discharge hopper is provided with a conical discharge tray, which promotes the material in the warehouse to flow slowly and evenly from the outlet, and has the function of preventing the material in the warehouse from arching. It is an ideal equipment for unloading the bottom of the tank.

 

In the operation of the bottom vibrating discharger, the vibrating motor is mainly used as the source. The driving unloading hopper of the whole equipment vibrates at a high frequency. The center of the unloading hopper is provided with a conical discharge disc during the operation to promote the inside of the warehouse. The material flows out slowly and evenly from the outlet, and has the function of preventing the material in the warehouse from arching. It is an ideal equipment for unloading the bottom of the tank.

 

The bottom unloader is beautiful in appearance, compact in structure and convenient to use. It operates smoothly and has low noise during operation. Because of the distance between the bearing and the tooth box leaving the housing, the high temperature and lubrication are greatly improved. Since the electro-hydraulic push rod is hydraulically driven, it has automatic overload protection. When the operation is blocked, the pressure in the oil circuit increases to the set limit, and the overflow device overflows quickly and accurately, and the overload protection is implemented. The motor runs within the rated value and will not burn out.

http://www.zdsheetmetalfab.com/


Previous: Flour mill vibro discharger operation requirements

Next: Method of installing stainless steel tee