Product Categories
Contact Us
Attn:Mr.liu:(+86)13646178217
Mr.peng:(+86)15251501754
TEL: +86-510-88731537
Fax: +86-510-88340005
E-mail: wxzd@wxzd.com
Address: Yangjian Town, Xishan District, Wuxi City, Jiangsu, China
Home > Knowledge > Content
How to choose the cutting amount of stainless steel elbow
Apr 27, 2018

The stainless steel elbow has good plasticity. During cutting, the generated chips are difficult to break, increasing the friction between the chip and the rake face of the tool and increasing the cutting force.

At the same time, the work hardening will increase the hardness and strength of the material to be cut, which will also increase the cutting force.

   

When selecting the amount of cutting, stainless steel elbows should consider the following factors:

1. It is necessary to select the cutting amount according to the hardness of stainless steel elbows and various blanks;

2. It is necessary to select the cutting amount according to the tool material, welding quality and sharpening conditions of the turning tool;

3. It is necessary to select the cutting amount according to the part diameter, machining allowance and lathe accuracy.

 

http://www.zdsheetmetalfab.com/


Previous: 180 degree stainless steel elbow welding and processing

Next: Four quality inspection aspects of elbow welding