Product Categories
Contact Us
Attn:Mr.liu:(+86)13646178217
Mr.peng:(+86)15251501754
TEL: +86-510-88731537
Fax: +86-510-88340005
E-mail: wxzd@wxzd.com
Address: Yangjian Town, Xishan District, Wuxi City, Jiangsu, China
Home > Knowledge > Content
Elbow stainless steel fitting installation process and method of extending life
Apr 08, 2018

Stainless steel elbows are used and maintained in accordance with their correct and reasonable methods during operation, so that they can effectively extend their service life to some extent. What are the main methods?

1. Long-term storage of stainless steel elbows, to a certain extent, should be checked on a regular basis, to a certain extent, often need some exposed surface to be kept clean, remove dirt, tidyly stored in the indoor air drying place, is strictly prohibited Or store in the open air. The stainless steel elbows are often kept dry and ventilated, keeping the cleaners clean and tidy, and stored according to the exact storage method.

2. When stainless steel elbow ball valves, globe valves and gate valves are used, they are only fully opened or fully closed to avoid erosion of the sealing surface and accelerated wear. There is an inverted seal in the gate valve and upper thread stop valve. Tighten the hand wheel to the uppermost position to prevent the medium from leaking from the packing.

In the process of installing the stainless steel elbow, it can effectively install its product directly on the pipeline according to the way it is connected and install it according to its use position. Under normal circumstances, it can be installed at any position on the pipeline, but it needs to be convenient. Inspection of the operation, pay attention to the flow of stainless steel elbow media should be up and down the vertical valve, stainless steel elbow can only be installed horizontally. When the stainless steel elbow is installed, it is necessary to pay attention to the tightness to prevent leakage and affect the normal operation of the pipeline.

http://www.zdsheetmetalfab.com/

Previous: Elbow weld fitting use requirements and process classification

Next: Variety of fast tube clamp and its manufacturing process